Implementasi Lean Manufacturing dan Menghindari Tabdzir untuk Peningkatan Produktifitas dengan Minimasi Waste

Nonie Afrianty

Abstract


This study aims to determine the causes of waste and minimize the causes of waste in the production process by using a lean manufacturing approach and analyzing it from an Islamic economic perspective. This type of research is field research with a qualitative approach. The informants of this study were the owner and 9 employees of the Saf'fana Furniture Store. The analysis technique used uses several tools, including VSM, Fishbone diagrams, Failure Mode and Effect Analysis. The results of this study indicate that the cause of the emergence of waste in the production process lies in the time of the drying process and repair of defective goods, the way to minimize it is to increase the stock of raw materials and increase worker discipline so that product defects do not occur, while in the perspective of Islamic economics the production process is classified as on tabzir because the time used to dry the raw materials and after the finished product must be repaired again on the defective goods, thus need creativity and discipline to workers


Keywords


Minimization, Waste, Production; Lean Manufacturing; Islamic Economics

Full Text:

PDF

References


D.W.Ariani. Pengendalian Kualitas Statistik. Yogyakarta: Andi Offset, 2005.

Fanani, Zaenal, and Moses Laksono Singgih. “Implementasi Lean Manufacturing Untuk Peningkatan Produktivitas (Studi Kasus Pada PT. Ekamas Fortuna Malang).” Jurnal Prosiding Seminar Nasional Manajemen Teknologi 8, no. 1 (2011): 1.

Hakim, Lukman. Prinsip-Prinsip Ekonomi Islam. Jakarta: Erlangga, 2012.

Liker, Jeffrey K. The Toyota Way. Jakarta: Erlangga, 2004.

Muhardi. Manajemen Operasi Suatu Pendekatan Kuantitatif Untuk Pengambilan Keputusan. Bandung: PT. Rafika Aditama, 2011.

Noor, Juliansyah. Metodologi Penelitian. Jakarta: Prenadamedia Group, 2011.

Ratnasari, Sri Langgeng. Perkembangan Ilmu Manajemen. Surabaya: UPN, 2012.

RI, Departemen Agama. Al-Qur’an Dan Terjemahan. Bandung: CV Penerbit J-ART, 2004.

Rozalinda. Ekonomi Islam : Teori Dan Aplikasinya Pada Aktivitas Ekonomi. Depok: Rajawali, 2012.

Setyawan, Danang Triagus. “Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing.” Jurnal Jemis 1, no. 1 (2013): 8.

Sugiyono. Metode Penelitian Kuantitatif, Kualtatif Dan Kombinasi (Mixed Methods). Bandung: Alfabeta, 2014.

Sunggono, Bambang. Metodologi Penelitian. Jakarta: PT. Raja Grafindo Persada, 2007.

Walenna, A.M.Adhitya A. “Studi Komparatif Hukum Tabdzir Dan 7 Waste Dalam Proses Manufaktur Untuk Meminimasi Biaya (Cost).” Jurnal Prosiding Konferensi Integrasi Interkoneksi Islam dan Sains 1 (2018): 1.




DOI: http://dx.doi.org/10.29300/ba.v6i2.4873

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Nonie Afrianty

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Indexed by:

 


 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.